Basic Information About Impact Crusher

Impact crusher is widely used in construction industry and mining industry. It is used to crush materials whose break point is under 350pa and size is no more than 500mm. When we need to create roads, electricity power and railways, we will need to use impact crusher to break down the stones into desired shape and size.

Due to the development of technologies, some types of impact crusher have changed to some degree. The changed impact crusher can crush materials into cubic products with very good grain shape without tension and crack. But it can only crush materials in the same size and same strength compared with the old ones.

Before operating the impact crusher, you need to make sure that it is in good condition. Check every parts of it and see if there are any parts broken. Operate the machine, and check whether the machine works smoothly. If there are any problems about the machine, repair it before operating it.

The impact crusher breaks down materials mainly by the effect of the hammer which is operating at a high speed. When the machine is turned on, the motor drives the hammer to operate quickly. Materials will be thrown to the impact device due to the affect of the hammer. The hammer keep throwing the materials against the impact device until the materials are small enough. We supply other types of rock crushers, such as cone crusher , jaw crusher and so on. If you want to know anything about our products, you can visit our website: http://www.sanmechina.com

Back to crusher page