The maintenance of stone crusher
1.the axletree of the crusher undertakes the whole load of the machine. So good lubrication has great significance to the axletree＇s life span. It influences directly to the life soan of the machine and the running rate. Thus, the lubrication poured in must be clean, and in good seal. Please fill the lubrication to the rolling bearing, all the gears, live bearing, roller bearing.
2.The newly installed strake must be examined regularly, because it is easy to loose connection.
3.Pay attention to each part of the machine about whether it is work normally.
Trail run of stone crusher
1.the machine should be installed on the plane concrete ground, and fixed with the stone bolt.
2.When stalling, pay attention that the main machine is vertical to the horizontal.
3.Configuring the power line and the control switch according to the driving system.
4.After installment, check the bolt and the door of mainframe.
5.After examination, you can step into the dead load trail run.
Treatment and testing of stone crusher
Preparations:
1.Tools: wrench, pliers, screwdriver, hammer,shovel and so on.
2.Necessary substitute accessories: short link chains of all kinds, chain stiching, bolt, nut and the insurance whistle of the crusher.
3. Lubricating oil and turbine oil
Examination and handling:
1. Make sure that the connection with each part is intact, complete and fasten. And the reducer and the hydraulic coupling are not having the condition of oil leakage and oil penetration.
2. The signal must be delicacy and reliable, no signal no starting up. The spray sprinkle must be in good condition.
3. Please hang the power cable and the pilot wire tidily. Make sure that they are not extruded.
4. Sweep the coals, sundries around the hand piece, electromotor and the reducer.
5. The walking machine of the reversed loader must stable and reliable.
6. Ensure that the safety nets of crusher and the protector will not transform and lose efficacy.
The operation of stone crusher
1. Power transmission by switching handlebar of the magnetic starter.
2. Press the button twice or three times.
3. Switch on the machine and spin one or two circles.
4. Combine the reversed loader and crusher together.
The stone crusher normally named crusher, including crusher and sand making machine. It is applied in many areas, such as high speed railway, expressway, urban renovation project, the construction of water conservancy project and other areas where need lots of gravels. Now there are many kinds of stone crusher equipment on the market, they are jaw crusher, impact crusher, cone crusher, hammer crusher, etc.. Other auxiliary equipment include vibrator feeder, conveyor belt, vibrating screen and sand washer.
In a word, after many years of effort, now the quality of stone crusher is quite well and it is now of first class technology.
Back to The Latest News
Related Products:
|
|
|
Related News：
Stone Crusher Used in Mining Industry
