Information on Parts of the Stone Crusher

According to the large class, the stone crusher can be divided into medical stone crusher and mining crusher. However, the medical stone crusher including the pneumatic lithotripsy and extracorporeal shock wave lithotripsy crusher. But both of them are mainly the following several parts. Here we will focus on the introduction of the parts of stone crusher.

Firstly, every stone crusher has a feed hopper, which is invert bevel-shape. And the hopper is set a wear ring that the feed can enter into the stone crusher. Because the same batch of the material is not the same, for this reason, there is a distributor that fix to the upper cylindrical section of the vortex dynamic crushing cavity. The function of the distributor is to divert the feed, so that the parts of the material directly into the center of the impeller, which will be projectile out by the accelerated speed. And the other parts of the feed from the center of the outer tube enter into the outside of the inside impeller of the vortex dynamic crushing cavity and being ejected out by the impeller crushed with high velocity. All these operation without increasing the power consumption, production capacity and improve the crushing efficiency. We has mention the vortex dynamic crushing cavity and impeller above, now let’s talk about these two parts of the stone crusher together because they operate tightly.

The structure of the vortex dynamic crushing cavity is annular space with two cylinders. And the impeller is hollow cylinder made by a special material, which is installed in the spindle assembly upper shaft head. The impeller rotates with high speed in the vortex dynamic crushing cavity. The vortex dynamic crushing can reside forming feed lining. The crushing process of feed occurs in the vortex dynamic crushing cavity. To limit the crushing effect only between the feeds, the feed lining separates the crusher effect and the wall of the vortex dynamic crushing cavity. The key part of the stone crusher is the impeller.

And the main spindle assembly is installed on the pedestal and consisted of bearing, spindle and other components. The spindle assembly use to pass through the triangle belt from the motor power and supporting the impeller rotating motion. The pedestal is in the shape of a central for four prism space, and the space center use for mounting the spindle assembly and the two sides form discharging channel. The vortex dynamic crushing cavity, main spindle assembly, the motor and the gearing are all installed on the pedestal. The last part of the stone crusher is the lubrication system, which on the two ends of the spindle. Now mostly parts of the stone crusher have introduced above. Of course, not every stone crusher is same, but the parts mentioned above are essential parts of the stone crusher.

Back to The Latest News