Professional Tips on How to Maintain Cone Crusher

According to the professor overhaul of the cone crusher can be divided into: the regular maintenance and minor repairs, repair and overhaul. The maintenance interval cone crusher can generally be press table arrangement.

There some tips we must focus when we start checking which one we need to repair. The number of parts was counted before installation. Check and remove all parts processing surface and thread damage in loading and unloading handling, and remove when packing in processing on the surface of a protective coating as well as in handling the dust and dirt on the lagged. Secondly, when installed on the fixed contact surface coated with oil, the surface coated with thin oil. Besides, breaker must be installed on the basis of a solid reinforced concrete, the depth of the user depend to the geological conditions of the local decision. In order to avoid the breakage of ore accumulation, foundation bottom must have enough space, transport equipment installation. For the sake of the base from being damaged, must cover plate on the upper base, the self-provided by the user. Importantly, rack, shaft and empty eccentric shaft must be paid more attention to the installation so that it can be mended easier in case of destroying.

Machine maintenance is an extremely important regular work, it should be in close coordination with the machine operation and maintenance, etc, should be professional. The personnel on duty checks.

According to the professor’s advice. The machine protection is involved in bearing. Crusher bearings for machine full load, so good lubrication for the bearing life has a lot to do, it will directly affect the machine. Life and availability, and thus require the injection of lubricating oil and must be clean and seal is good. Tips are below:

1, the tire of the newly installed easily loose must often check;

2, pay attention to each part of the machine working normally;

3, pay attention to check the easy wear parts wear degree, watch to replace worn or damaged parts;

4, put activity unit chassis plane, should be out dirt and other material to avoid activities when machine can't broken material bearing can't move on the chassis, so that a serious accident;

5, bearing high oil temperature rise, should immediately stop check reason to eliminate;

6, the rotation gear in sound operation, if there is impact should immediately stop check, and remove.

The well the machine are protected, the more profit you will get. So please cherish your machine!

Back to The Latest News