With the national economic development brought by the Reform and Opening up Policy, market demand is driving the development of impact crusher. Among the basically used five types of crushers, impact crusher belongs to the machine which crushes brittle material mainly with impact power.
There are many factors that can affect the production capasity of the impact crusher and they can be classified into 5 aspects, so here I would describe these 5 factors and propose the corresponding solution:
1 The hardness of the material: the harder the material, the more difficult it is to smash, and the more serious it would cause to the impact crusher. So we need to pay more attention on the choice of the materials.
2 The composition of the material: the finer the powder it contains in the feeding material of the impact crusher, the more difficult it will be for the machine to make small size rocks. The powder is easy to adhere to the machine; as a result, it will affect delivery. Based on this, materials with high content of fine powders should pass through a sieve in advance for fear that it would affect the normal work of the impact crusher.
3 The fineness of the material after being smashed by the impact crusher: the requirement of the material is high, namely the finer the material after it is squeezed, correspondingly the smaller the production ability of the crusher. This aspect is determined according to the specific requirement, if there is no special demand, usually the fineness of the material can be set in the degree of “middle fine“.
4 The viscosity of the material: it is easier for the high viscosity material to adhere to the impact crusher. The material with greater viscosity would adhere to the in-wall of the making sand chamber. If it is not cleaned up in time, it will affect the working efficiency of impact crusher. What’s worse, it would also affect the normal work of the vertical impact crusher. Therefore, when selecting a material, it is important to note that do not choose material with great viscosity.
5 The humidity of material: it goes without saying that when material is rich in moisture, the material is easy to adhere in the vertical impact crusher, likewise, it is also easy to cause blockage in the process of the material transporting. Eventually, this would reduce the working capacity. To solve this problem, on the one hand we should control the humidity of the material strictly when we are choosing the material. On the other hand, if the selected material is rich in moisture, we can use the sun exposure or air drying as well as other ways to reduce the percentage of moisture in the material.
With the energy saving and high broken efficiency features as well as the performance of easy to install, impact crusher is becoming the most popular crush machine in this field. Pay attention to the factors that will affect impact crusher’s production capacity and use make fortune from the impact crusher.
Back to The latest news
Related Products:
|
|
|
Related News：
Success Stories of Impact Crusher in Various Areas
