Tips to Replace the Stone Crushers Parts

The stone crusher is a very useful machine in many ways and is widely used in our daily life. But it is inevitable that the machine may be broken or not work very well. And sometimes we may need to buy a new substitute part to replace the old one. How to replace the stone crusher’s parts?

What the procedure and tips are? Is there anything you need pay attention to? What is the most professional way to replace the broken stone crusher’s parts and make it be in the best condition? So next, we need to know some tips of the most professional way to replace the stone crusher’s parts.

The first thing to talk about is the procedure and the safety precautions to replace the hammer of a stone crusher. Before you enter the work site, you must wear the safety helmet, overalls and non-slip shoes. Then the safety and security must be ensured before going to work.

There must be no drunk before maintenance. What’s more, you must make sure that before you begin to replace the stone crushers parts, the electricity must be cut off to avoid the electric shock when working and put the sign’ no switching, somebody’s working’ on the control cabinet.

And after you have finished the maintenance, you need to put away the sign at once. During the replacement, there is also a lot of things which need special attention. First, when using the lighting, you must use the open wire head. Above all, the cable line must not be damaged in case of an accident.

A protective holder must be put out of a light. Then remember to eject everyone in the working site and everything should be done in the condition that there are no other people in the working site. If you have to use the oxygen and the electric welding, you must obey the operation procedure strictly.

Then clean the crusher mouth before replacing the hammer and put the rotator plate of the crusher to the right position and fix it. Next use the oxygen to cut the fixed bolt of the hammer and extract it. Hold the pin and if it cannot be extracted, use the oxygen to cut it then extract it.

After this process, remember to put away all the tools you have used to ensure you safety and security and avoid the interruption of the work. Then put the new hammer to the crusher mouth. If you use the pipe or crowbar, use your hand to keep it stable in case it huts other people. When replacing the hammer, one thing you must do is to check each hammer’s weight to keep the balance of the rotator and after the replacement, you need to check it as a whole. After the installation is finished, fix all the bolts and at last, turn the rotator to examine the interval between the hammer and the sieve plate.

Back to The Latest News