Principles and Predominance of Impact Crusher

When refer to impact crusher, we have to tell something about its construction, working principles and irreplaceable predominance. Impact crusher is consisted of rack, rotor, hammer board, counter-attack board, and side rack and so on.

Impact crusher performs with a simple principle. When electromotor drives rotor spin, material go into hammer board section and collide with hammer board on the rotor, and then being crushed by thrown to counter-attack device. Repeat impact in the impact crusher can crush the stone into pieces as you expected. For that even though some of the stone is not crushed for the first impact, but it must be crushed in the later impacts. It must be crushed into the expected size before layout.

Replacement of impact crusher set is convenient so the cost of it should be low accordingly. There are only 6 hammer boards on the rotor so it is easy to replace which only costs you several hours and the replacement of grind rod can reach 10 minutes at least.

Impact crusher owns a series of predominance that other crushers do not have. Conducted by many manufacturers are with advanced technology from home and abroad. And most domestic manufactures take the special circumstance of home into consideration to promote the performance efficiency so that it can fit for the requirements of domestic needs. Many impact crushers have a bigger crushing cavity, allow larger feedstock granularity and newly heavy-duty designation makes it more powerful to rotate and increase production, get a larger crushing ratio so as to reach good combination of low cost, energy-saving and high efficiency. Finished product presents square, no tension and crack. What is more, impact crusher applied the technology of no-button connection. So it is very easy to repair and check. Yet for this unique feature, it is widely advocated to apply on a large scale.

If impact crusher is in trouble, it would present immediately. If you found it shaken, there must be something wrong. Maybe the feedstock is too large. Maybe the grind of the hammer board is not in balance. Maybe treatment with its foundation is not correct. No matter what it is, what you should do is deal with all troubles accordingly. Such as check the size of feedstock, replace hammer board, adjust rotor in normality and check bolt and fasten it. All these are very easy to do with. So if you are not so familiar with impact crusher or you thought you do not take good command of it, it does not matter, it is easy to learn even though you are a rooster in this field. Its predominance and simple working principles determined itself to be popular and accepted in a wide field.

Back to The Latest News