Want to Know More About Stone Crusher Wheel?

The stone crusher wheel consisted of flywheel, pulley and counterweight wheel. The flywheel can divide into single flywheel and double flywheel. And the double flywheel is used more common. No matter the single or double flywheel, the wheel moment should be ensured. Therefore, it can only saves part of the material flywheel and reducing processing fees, etc. There is also use the flywheel in domestic production. The stone flywheel stored energy when it is space and released the energy in the operation. Assuming the stone crusher power is P when it is in the idling condition, the power consumption of crushing material is P during operation and the motor rate power is P, the excess power will make the angular velocity of the flywheel to enter into its operation. When the power shortage and the angular of the flywheel reduced, the flywheel of the stone crusher will release the energy to increasing the effective power to broken material and to improve the efficiency of the crushing process. The flywheel often made by cast iron or steel and the mini flywheel often made into integral. The static equilibrium should be pay attention to on the manufacture and installation of the flywheel.

Typically one of the flywheels always been taken as drive wheel to install the belt. The belt usually used for jaw crusher. However, the jaw always has two motors, so it put the double flywheel as pulley. This will not only simplify the device body, but also make the best use of the wheel. The pulley also plays the same role as the flywheel. The pulley drive has the function of overload protection. The advantages of the pulley are smooth running, low noise and low vibration. And the structure of the pulley is simple with convenient adjustment. There is a wide range of adjustment of two centers distance of the pulley. The manufacture and installation accuracy is not strictly as the meshing transmission. The pulley is the role of the transmission torque and the motor through a transmission belt. In one word, the function of pulley is transportation.

The counterweight wheel is able to make sure the stone crusher work smoothly.
Due to the stone crusher have two conditions, working and idle, so the load on the motor is very uneven. In order to reduce this imbalance load, both ends of the eccentric shaft have set up flywheel and pulley. How the stone wheels reduce the load, we have mention above. Of course the stone crusher wheel is very important for the stone crusher.

Back to The Latest News